How to Build a Basement Wall

How to Build a Basement Wall

DIY Finished Basement, Random Projects
Want to diy finish your basement? One of the first things you'll do after choosing your layout is to build a basement wall. It doesn't have to be hard, but there are a few things you need to know and plan in order to make sure you do it right. Here’s a quick overview to get you on the right track. How to Build a Basement Wall Overview in 6 Steps 1st: Attach pressure-treated lumber to the floor 2nd: Mark and plan your studs 3rd: Cut and build your wall on the floor 4th: Lift and stand the wall into place 5th: Install the bottom screws and then level the wall 6th: Once the wall is level, add the top screws Have questions? Leave a comment or head over to Instagram…
Read More
How to Properly Attach Pressure Treated Wood to a Concrete Floor

How to Properly Attach Pressure Treated Wood to a Concrete Floor

Random Projects
Ready to finish your basement and start your framing? It's not hard, but it's important that you properly attach pressure treated wood to the concrete floor first. Here’s how to attach your pressure treated 2x4 to the concrete so you can get your framing started! First drill holes for the Tapcons every 2-3 feet. The holes should be about the size of the Tapcon since the only thing catching on the 2x4 should be the head of the screw. (TIP: raise your 2x4 up with some scrap before drilling to avoid hitting the concrete and causing your drill bit to become dull… I learned the hard way ) Next line up your 2x4 with your square chalk line and mark a darker line. (If you don’t have chalk lines from…
Read More
Beginner Tips to Install DIY Crown Molding

Beginner Tips to Install DIY Crown Molding

Indoor Projects, Random Projects
Crown moulding elevates a room and gives it a finished look without a huge investment. It's also a great DIY project. If you're looking to install crown molding, this is the post for you. I'm sharing my top tips for beginners to make your first install easier! How to Install Crown Molding Want to install crown molding? Your in luck here are some of my top beginner tips! Tip 1: Always mark your studs in advance and if possible always nail your crown into studs… you really don’t want it coming back down Tip 2: For the first piece, I’ve found that cutting it flat/straight at both ends and then coping the other pieces that meet it make a huge difference. Tip 3: Use an 18 gauge brad nailer with…
Read More
How to Get Crisp Clean Paint Lines Without Bleeding

How to Get Crisp Clean Paint Lines Without Bleeding

Indoor Projects, Random Projects
Want crisp paint lines every time? This simple painting hack makes it easy and helps you get crisp clean lines and stops bleed through when painting walls or trim!(Note: This post includes affiliate links. As an Amazon Associate I earn a small commission from qualifying purchases when you purchase through my link. Thanks!) [caption id="attachment_1008" align="alignnone" width="400"]   5 Steps to Crisp, Clean Paint Lines without Bleed Through 1st: Put the tape on as smooth as possible (I prefer Frog Tape) 2nd: Use a putty knife to make sure the edge is perfectly smooth 3rd: Paint over the edge of the tape with the previous color already on the wall (green) 4th: Paint 2 coats of the final color (brown) 5th: Pull the tape at an angle to get that perfect…
Read More
Double Cub Cadet Bagger for the Ultima Zero Turn Mower Review

Double Cub Cadet Bagger for the Ultima Zero Turn Mower Review

Landscaping, Outdoor Projects, Random Projects, Reviews
**Be sure to check out the 5/2021 update at the bottom of the article** It works! ... for now (Originally posted 6/2020) When you spend around $3,500 for an exceptional new mower you expect the almost $500 Cub Cadet bagger to be made with the same excellent quality, right? WRONG. Double Cub Cadet Bagger for the Ultima Zero Turn Mower Review The double bagger for the Ultima ZT1 42" and 46" mower is disappointing. The problems are so obvious it doesn't take an expert to find them. Here are the top 10 problems with the Cub Cadet double bagger for the 42" and 46" Ultima Zero Turn Mower. Related Article: Top Five Features of the Cub Cadet Ultima ZT46 #1 Cheap Plastic Is it me, or am I crazy? When designing…
Read More
Can You Put Soft Close Cabinet Hinges on Old Cabinets?

Can You Put Soft Close Cabinet Hinges on Old Cabinets?

Bathroom, Indoor Projects, Kitchen, Random Projects, Reviews
Have you ever seen cabinets with the soft-close feature? If you have don't have them, I bet you wish you did! Soft-close cabinet hinges definitely make your kitchen quieter and give your kitchen a high-end feel, but replacing all your perfectly fine hinges seems a bit wasteful. But WAIT I have great news for you. There is a way to give your old cabinets that soft-close hinge feel for about $3 each! Can You Put Soft Close Cabinet Hinges on Old Cabinets? With a simple add-on product, you can CONVERT your old cabinets into soft-close without replacing your hinges. They are quick and easy to install and almost anyone can do it. Seriously, they cost $3 or less each and take less than 5 minutes each to install. You Might…
Read More
How to Frame a Mirror

How to Frame a Mirror

Bathroom, Indoor Projects, Random Projects
We've all seen them — those plain, flat standard mirrors that are either glued or pinned to the wall when you move in. They are usually extremely boring and look cheap. You might find yourself wondering how to remove and replace it? Well, instead of going through the trouble of removing the builder grade mirror, you can upgrade it by adding your own mirror frame made from stock trim. How do you frame a mirror? Below I'll share how I was able to frame a mirror for a drastic change and include all the tips to make it easy for you to make your own mirror frame. [caption id="attachment_840" align="alignnone" width="600"] Our basic mirror was boring. Adding a frame was easier and cheaper than replacing it.[/caption] How to choose trim…
Read More
The Rustoleum Comfort Grip Makes Spray Painting Super Simple

The Rustoleum Comfort Grip Makes Spray Painting Super Simple

Random Projects
Have you ever heard of the Rustoleum Comfort Grip Universal Spray Paint Gun? Despite its super long name, this little trigger add on tool is super easy to use!   The Rustoleum Comfort Grip Makes Spray Painting Super Simple I don't know about you, but every time I have to spray paint something I practically get a hand injury! Holding the classic can and pushing the tiny nozzle trigger makes spray painting a miserable job that seems to last for an eternity. Then I found this! The Rustoleum Comfort Grip is a simple, cheap attachment that makes spray painting 10x easier! Simply Click and Get Spraying It doesn't get any better than this folks. You simply click the tool onto the top of the spray can, then instantly you have…
Read More
Honeywell $20 LED Shop Lights, Worth the Money?

Honeywell $20 LED Shop Lights, Worth the Money?

Random Projects
Does your workshop or workspace look like a scene from a horror movie... ya know... a dark room with one eerie light bulb in the center? Luckily, nothing attacked me in my shop but just in case something might be lurking, I found these Honeywell 5000 Lumen 4' LED Shop Lights at Sam's Club for about $20 each. Honeywell $20 LED Shop Lights, Worth the Money? Everyone knows that a dark workspace can make a project more difficult, but good lighting can be hard to achieve, especially on a budget. These inexpensive fixtures totally changed the lighting and made it almost too bright... keep reading to see why. How well are they built? The Honeywell 5000 Lumen 4' LED Metal Shop Lights are made out of moderately weighted metal and some plastic.…
Read More